Table of Contents
Advertisement
• Place the small ceramic briquette tray at the
Finalize
Installation
• Place the grill grates over the opening.
• Remove burner grates.
Install
• Remove front (large) ceramic briquette tray.
Rotisserie
• Place small ceramic briquette tray in the rear
• Place drip pan on the grill floor and against
• Slide the motor down into the channel on
• To use, place pointed end of the skewer into
• Screw handle onto the threaded end of the
Install
Optional
Access Doors
ZXADYSS
and
ZXSDBSS
(For Built-In
Installations
Only)
ZXADYSS - Double Doors
The opening should be 24-1/8" wide and
18-1/4" high.
ZXSDBSS - Single Doors
The opening should be 22" wide and 20" high.
rear and larger tray towards the front.
slots as shown.
the briquette tray.
the right side.
the motor, and the threaded end resting on
the left side support.
skewer.
Installation
24" Outdoor Cooking Center
Note: The ceramic briquettes may move during shipping or when
repositioning for rotisserie use. For best cooking performance,
slide briquettes on the tray so they are evenly spaced and do not
block vent holes.
Note: Remove motor when not in use. Store motor in dry place.
• Place the frame into the opening and secure
with screws on all sides.
• Hang the doors on the hinges as shown.
9
Advertisement
Table of Contents
