Operation
Busy Channel Lockout
If the channel is already in use, you can prevent the UH089NB from
transmitting . This is particularly important when using CTCSS or DCS.
Press [MENU] 2 times. Turn the Rotary Channel Selector to display
Press and hold [MENU] for 2 seconds to store the new setting.
If a button is not pressed within 10 seconds the UH089NB
will automatically exit the Menu Mode.
NOTE
Roger Beep
A Roger Beep may be added to the end of transmission.
Press [MENU] 3 times. Turn the Channel Selector to display
Press and hold [MENU] for 2 seconds to store the new setting.
If a button is not pressed within 10 seconds the UH089NB
will automatically exit the Menu Mode.
NOTE
UNIDEN UH089NB
UH089NB
UH089NB
17
.
.
UHF CB Transceiver