Mac Filter; Mac Filter Settings - D-Link DWR-932 User Manual

Section 3 - Configuration
This page allows you to set MAC filters (Media Access Control) which allow or deny LAN (Local Area Network) computers from accessing the network.
A MAC address is a unique ID assigned by the manufacturer for devices that connect to a network. You can either manually add a MAC address or
select the MAC address from the list of clients that are currently connected to the router.

MAC Filter Settings

MAC Filter

Toggle this switch to enable/disable the MAC filter.
MAC Filter For Black Here is a list of clients' MAC addresses that have been
List denied access to your network.
ID ID number given to black listed clients by your router.
Delete Check this box to delete clients from the black list.
MAC Address Specify the MAC address of the computer to be
filtered.
Add New Select the Add New button and manually enter the
MAC address of the client that you wish to deny access
to your network.
Note: You can view the current list of clients connected to
your network and their MAC addresses in"Wi-Fi Clients"
on page 33.
Click Apply to save changes.
D-Link DWR-932 User Manual
MAC Filter
36