Advertisement
A
PPENDIX
Wall-Mounting the Intermezzo 2.6p Using an
OmniMount
®
75 WB Wall Bracket
Important Note:
Proper installation of these brackets
is the exclusive responsibility of the customer and the
manufacturer disclaims any liability for the mounting hardware
and bracket installation.
Important Safety Note:
Due to the Intermezzo 2.6p
bookshelf speaker's weight, it is recommended that two people
mount the speaker to the 75 WB wall bracket.
1.
After mounting the 75 WB bracket to the wall, following the
mounting instructions provided with the bracket, reassemble as
shown. Make sure to screw the Self-Locking Nut down until
the nylon ring at the top engages
at least 2 or more threads to
cause it to become secure.
Wall-Mount
Arm Ball
75 WB
Wall Bracket
2.
Turn the Intermezzo 2.6p bookshelf speaker upside down
and attach the Speaker Mount to the base of the speaker with
(4) 1/4-20 x 1/2" length bolts (included with the speakers).
No other hardware is recommended for this use.
(4) Supplied Bolts
Self-Locking
Nut
Lower
Tightening
Nut
U -shaped
bracket attaches
to the wall
Speaker
Mount
3.
Loosen the Adjustment Bolt on the front of the Speaker Mount
so that the jaws of the Socket Cup will accept the ball of the
Wall-Mount Arm.
Socket-Cup
Jaws
Adjustment
Bolt
4.
Lift the Speaker/Speaker-Mount assembly onto the Wall-Mount
Arm so that the ball fits into the Socket Cup. Adjust the speaker
to the desired position. While holding speaker, tighten the
Adjustment Bolt until the Socket-Cup Jaws hold the speaker
assembly securely in place. Adjust Arm to desired speaker
position and tighten the lower bolt. Snap the Wall-Bracket
Cover on.
Speaker/Speaker-
Mount Assembly
Lower
Tightening
Nut
Speaker
Mount
Socket-Cup
Jaws
INTERMEZZO 2.6p
7
Advertisement
