Panasonic CF-29 Series Reference Manual page 44

Battery Power
About High Temperature Mode
Left: The remaining power of the main battery.
Right: The remaining power of the second battery (optional).
NOTE
In the following cases, there may be a difference between the remaining battery
capacity displayed on the indicator and the actual remaining battery capacity. To
correct this, perform the "Battery Recalibration." (
• The battery indicator light remains red.
• The battery remaining displays 99% and the indicator light is orange for a long
period of time.
• Low battery warning appears after a short period of time.
This may be caused by the use of standby mode for long periods of time. The
battery is discharging while the computer is in standby mode when the AC adaptor
is not connected.
There may be a discrepancy between the % value that is displayed on the taskbar
icon, and [Power Meter] in [Power Options Properties]. This is not a malfunction.
This computer has a high temperature mode function that prevents the deterioration of the
battery in high-temperature environments or when using the fully charged battery pack for a
long period of time.
To use the high temperature mode function, set [Environment] in the [Main] menu of the
*1
Setup Utility to [Auto] or [High Temperature]. In [Auto] mode, high temperature mode or nor-
mal temperature mode is selected automatically depending on the battery status (the internal
temperature of the battery pack, etc.) or usage condition (when the AC adaptor has been
connected for a long period of time).
Note that a level corresponding to a 100% charge for high temperature mode is
approximately equivalent to an 80% charge level for normal temperature mode.
*1
The default mode.
44
page 47)