Related Manuals for Curtis DVB203UK
Summary of Contents for Curtis DVB203UK
- Page 1 USER S MANUAL Of Digital Set Top Box DVB203UK DVB203UK Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.
- Page 2 Mains plug and mains lead IMPORTANT SAFETY INSTRUCTIONS We have fitted this equipment with a standard mains plug. WARNINGS If you cut off the mains plug or fit a different type, destroy the old plug, as it is dangerous to TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY TO PERSONS, PLEASE CAREFULLY READ ALL SAFETY INSTRUCTIONS.
-
Page 3: Table Of Contents
Foot pads Table of Contents Caution: foot pads (if supplied) may cause discolouration of certain furniture and shelf finishes. DISPOSAL Front and Rear Panel Illustration ...........1 As a responsible retailer we care about the environment. As such we urge you to follow the correct disposal procedure for the Remote Controller ................1 appliance, packaging materials and if applicable, batteries. -
Page 4: Front And Rear Panel Illustration
Front and Rear Panel Illustration Remote Controller 1. Front Panel Remote Key Function: 1. MUTE Used to turn the sound on or off. 2. NUMBER KEYS:Used to select channel numbers or input numbers in menus. 3.TV/RADIO: Used to switch between TV channels and Radio stations. -
Page 5: Connections
Installing the Batteries Connections Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment. Caution: Make sure to check the voltage specification of the wall outlet is the same The diagram inside the battery compartment shows the correct way to install the rating with the receiver. -
Page 6: User Interface
7) Digital Information User Interface When viewing a digital program, a single press of the INFO key will bring up the first level of program information shown below. This shows the The 'Exit ' key will remove all digital menus. time, logical channel number, channel name and 'Now' program information. - Page 7 Again, the user will be able to scroll through information for other channels 8) Channel Change OSD whilst still watching the current program by using the P+/P- keys. In addition, This is the graphic seen after using P+/P- or when a direct digit entry the left and right cursor keys will toggle extended info for 'Now' and “Next”.
- Page 8 13) Main Menu 10) Subtitle The Main Menu contains the following options. Pressing the subtitle key will display the following menu. This menu displays all the subtitle streams available on the current service and a subtitle off option. The selection is done using the up/down keys. Pressing the OK key selects the new subtitle language.
- Page 9 2. Favourites (1).Select main menu. (2).Scroll to favourites. Re-order Menu (3).Press green button to create favourite list. 2.2) Name Editor (4).Press yellow to show edit list. This name editor menu is used for allowing the user to rename a favourite (5).Sroll up/down to select channel.
- Page 10 If the PIN is not entered before a timeout or it is skipped then the event The options are: will still be added and viewing restrictions will apply to the event Three digit channel number. Date Start date in DD/MM/YYYY format. depending on its censorship level.
- Page 11 System benefit from being supplied with a default PIN and a master PIN. The master PIN is intended to be used to over-ride the user supplied PIN if it is lost or forgotten. 4.3.3) Parental Control Menu Entering a valid PIN gives access to a sub menu that provides options to change the PIN, Lock and Unlock services or adjust Censorship.
- Page 12 4.3.5) Parental Locking Change PIN 4.4.2) Full Scan Replace Existing Services Selecting the option to change the PIN takes the user to a further sub When 'Full Scan Replace Existing Services' option is selected, the menu that handles the confirmation and storing of the new PIN. same as the 'Full Scan Add New Services' menu is displayed except The menu prompts for a new PIN.
- Page 13 Signal Level Bar indicator to show the current signal level. If the video can't be displayed then one of the following messages will This bar will have 3 colours to distinguish how good the be displayed in the preview area: signal is: RED=Bad, YELLOW=Medium and GREEN=Good.
- Page 14 (2) Progress 4.5) Check For Download During the download progress a message will be displayed which The option allows the user to update the software. details to the user any message that the manufacturer requires this message is broadcast as part of the download and isn't hard-coded into the interface.
-
Page 15: Specifications
Troubleshooting Specifications If you experience problems with this receiver or its installation, in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section. Reconnect the STB The Scart interface not and the TV set connect hard...