Biostar TP35D2-A7 SE Setup Manual page 20

Motherboard Manual
On-Board LED Indicators
There are 2 LED indicators on the motherboard to show system status.
LED1 and LED2:
These 2 LED indicate system power on diagnostics.
Please refer to the table below for different messages:
LED1 LED2
ON ON
ON OFF
OFF ON
OFF OFF
On-Board Buttons
There are 2 on-board buttons.
PWRSW1:
This is an on-board Power Switch button.
RSTSW2:
This is an on-board Reset button.
18
LED2
LED1
Message
Normal
Memory Error
VGA Error
Abnormal: CPU / Chipset error.
RSTSW2
PWRSW1