Installing The Onetouch Iii; Step 1 - Install The Software - Maxtor OneTouch 3 User Manual

MAXTOR ONETOUCH III TURBO EDITION WINDOWS INSTALLATION

Installing the OneTouch III

NOTE: Please install the Maxtor OneTouch software before
connecting the OneTouch III drive to your computer. You must
first install this software in order to use the OneTouch button
and other OneTouch III features.
Step 1 – Install the Software
If you receive a message that you do not have sufficient
privileges to complete the installation, you may not have the
Administrative Privileges required to install the software.
To determine if you have these rights:
– Click the Windows Start button and choose Control Panel.
– Double click the User Accounts icon.
– If your account Logon is displayed at the bottom of this
window with the description: Computer Administrator,
you have the correct administrative privileges to install
and run this software. If your system shows another type
of account status, contact your IT/Systems Administrator
for further assistance.
1. Turn on your computer.
2. Insert the Maxtor Installation CD into your CD-ROM drive.
After a few seconds, the Maxtor Select Language screen
will open.
If, for some reason, the Maxtor screen does not appear:
– Click the Windows Start button and then click Run.
– Click Browse and find the drive named Install CD.
– Open Install CD, open Launch and click OK.
The Select Language screen will appear (same screen as
shown in step 1).
3. Select your language. The main menu will appear next.
PAGE 36