Before You Begin; Modular Jack Requirements; Installing The Battery; Parts Checklist - GE 29869 Series User Manual

B Y
EFORE
P C
ARTS HECKLIST
Make sure your package includes the following items:
N
ET I
MESSAGES
PREVIOUS NEXT
STOP
PLAY PLAY
2 4
PLAY
3
1
PLAY
Answerer
M J
ODULAR ACK
You need an RJ11 type modular jack, which is the most
common type of phone jack and might look like the one
pictured here. If you don't have a modular jack, call your
local phone company to find out how to get one
installed.
I
NSTALLING THE
In the event of a power loss, a 9-volt battery (not
included) enables the answerer to retain greetings and
messages stored in memory. To install the battery:
1. Remove the battery compartment door on the bottom
of the unit by loosening the screw with a Phillips
screwdriver. Lift the door.
2. Connect a fresh 9-volt alkaline battery (not included).
The large and small contacts on the battery clip and
the battery will interlock. Once connected, place the
battery inside the battery compartment.
3. Replace the battery compartment door and tighten
the screw.
NOTE: If the battery is low or not installed, the unit
announces "Low Battery" at the end of message
playback.
4
B
OU EGIN
MIC
AC power supply
R
EQUIREMENTS
B
ATTERY
Battery
compartment
door
-
+
-
+
Battery
Battery clip