Advertisement
Quick Links
VEC157CL_157CFL_Manual_061505
6/29/05
Operating Issues
1. When charging, Area Light will operate, Spotlight will not. Be sure all charging
cords/adapters are disconnected before main beam usage.
2. If Trigger can't be fully depressed, check to see if Trigger Lock Switch is in the
"locked" position. Move it to the "unlocked" position.
3. If unit does not operate battery may be completely discharged. Charge unit
following the directions in this manual.
4. If you suspect a bulb is blown, check bulb filament. If filament is coiled and
unbroken, the bulb is not blown. If filament is blown, replace bulb.
SPECIFICATIONS
Spotlight Bulb:
12 volt, H3 series
Battery:
Maintenance-free, sealed lead acid,
12 volt, 3 amp hour
AC Charger:
UL Listed Class 2, 12 volt DC (300 mA)
DC Plug Fuse
8A/250 V
4:22 PM
Page 8
8
Spotlight
2,000,000 Power Series
Corded • Cordless • Rechargeable
53SB
USER'S MANUAL
E231887
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.
Toll Free: (866) 584-5504
www.vectormfg.com
VEC157CFL
VEC157CL
™
Advertisement
Related Manuals for Vector VEC157CFL
Summary of Contents for Vector VEC157CFL
-
Page 1: Warranty Information
6/29/05 4:22 PM Page 8 Operating Issues VEC157CFL VEC157CL 1. When charging, Area Light will operate, Spotlight will not. Be sure all charging cords/adapters are disconnected before main beam usage. 2. If Trigger can’t be fully depressed, check to see if Trigger Lock Switch is in the “locked”... -
Page 2: Important Safety Information
5. Do not substitute power cords or charging adapters. Only charge with supplied AC and DC This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in charging adapters. Charging adapters for this unit supply 12 volts DC. - Page 3 VEC157CL_157CFL_Manual_061505 6/29/05 4:22 PM Page iv TABLE OF CONTENTS Introduction ........... 1 Features .
- Page 4 VEC157CL_157CFL_Manual_061505 6/29/05 4:22 PM Page 2 OPERATING INSTRUCTIONS BUILT-IN RUBBER BEZEL Charging Using the 120 Volt AC Recharge Port WORKSTAND CARRY HANDLE 1. Make sure all lamps are turned OFF. SPOTLIGHT 2. The 120 Volt AC Recharge Port located on the rear of the spotlight (see back view) can be recharged using an ordinary household extension cord rated 120 volts (not included).
-
Page 5: Spotlight Bulb Replacement
VEC157CL_157CFL_Manual_061505 6/29/05 4:22 PM Page 4 2. Recharge for 3-4 hours maximum or until the green Battery Charge Level LED Using the Built-In Workstand Indicator lights when the Battery Level Display pushbutton is pressed. Turn the Spotlight upside-down on a smooth even surface, and rest it on the Workstand. -
Page 6: Battery Replacement/Disposal
One part is user replaceable. The quartz halogen bulb is proprietary and is B) Check for bad connection to AC or DC adapters available through Vector. A substitute 12 volt H3 75 watt bulb may be used in C) Confirm there is a functioning AC or DC current place of a existing bulb.