Nokia 5140i User Manual page 53

To deactivate the IR connection, select
Connectivity > Infrared. When the phone displays
select Yes.
If data transfer is not started within 2 minutes after the activation of
the IR port, the connection is cancelled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and
your phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or
a connection has been lost.
Packet data (EGPRS)
Enhanced general packet radio service (EGPRS), packet data, is a
network service which allows mobile phones to send and receive data
over an Internet protocol (IP)-based network. It enables wireless access
to data networks such as the Internet.
The applications that may use packet data are MMS, browsing sessions,
e-mail, remote SyncML, Java application downloading, and the PC
dial-up.
To define how to use the service, select
Connectivity > Packet data
Select When needed
when an application needs it. The connection will be closed when the
application is terminated.
Select Always online
packet data network when it is switched on.
indicates a packet data connection.
Modem settings
You can connect the phone using an IR or a data cable (CA-42)
connection to a compatible PC, and use the phone as a modem to enable
packet data connectivity from the PC.
> Packet data
to set the packet data connection to be established
to set the phone to automatically connect to an
Menu > Settings >
Deactivate
Menu > Settings
connection.
S e t t i n g s
infrared?,
>
53