Table of Contents
Advertisement
Charging
- Remove the cover on the charging port and connect the charger.
- When the charger is connected with power on or off, the Headset will turn off. While charging,
the LED indicator will show a solid red light.
- The buttons will not function while the device is charging.
- It takes 3 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.
Low battery
- The LED indicator will blink red when the battery power is low.
- When the battery is not charged, the LED indicator will be blinked red and then turn off.
- When this occurs, the battery needs to be charged.
Power on
- Press and hold the PWR/END button for 2 seconds
✓
The power will turn on and a booting tone will play.
Power off
- Press and hold the PWR/END button for 5 seconds.
✓
A shutdown tone will play , the Bluetooth link will be disconnected, and the power will turn
off.
Pairing
- With the HBM-710 off, press and hold the PWR/END button for 5 seconds.
✓
You will hear a short beep and the LED indicator will stay red, when the device enters
Pairing Mode.
Using your handset, find the "Bluetooth menu" and "search for" or "add"new devices.
Select "LG HBM-710" from the list of devices and pair it with your handset.
-6-
Advertisement
Table of Contents
