Sharp 50NP4 Service Manual page 16

Component: Y-P P Inputs
B R
Inputs 1 and 2 provide Y-P
NOTES: 1. DO NOT connect standard VIDEO or S-VIDEO to Input 1 or 2 when using Y-P B P R input.
2. When using the Y-P B P R input jacks, connect your components audio output to the TVÕs Input 1 or 2 Left and Right Audio input jacks.
3. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TVÕs P B input and
the components R-Y output to the TVÕs P R input.
4. Your component outputs may be labeled Y-C B C R . In this case, connect the component C B output to the TVÕs P B input and the
component C R output to the TVÕs P R input.
5. It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-P B P R inputs.
6. To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-P B P R jacks.
7. When using the Y-P B P R jacks, PIP sub-picture can not be turned ON. It is not possible to view a Y-P B P R input while PIP is ON.
P jacks for connecting equipment with this capability, such as a DVD player or Set Top Box.
B R
16
REAR PANEL JACKS