Sharp LC-32HT3U Service Manual page 13

Preparation
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
LC-42HT3U
rm that there are 8 screws supplied with
1
the TV.
Short screws ( 4)
(Used in step 2)
Set the post for the stand unit onto the
2
box.
Attach the base to the post.
Insert and tighten the 4 short screws into
the 4 holes on the bottom of the base.
Hex key
Short screw
Long screws ( 4)
(Used in step 3)
1 – 8
LC-32HT3U/LC-37HT3U/LC-42HT3U
Insert the stand into the openings on the
3
bottom of the TV.
Insert and tighten the 4 long screws into
the 4 holes on the rear of the TV.
NOTE
• To detach the stand, perform the steps in reverse order.
Hex key
Long screw
Soft cushion