Sony MHC-GZX88D Operating Instructions Manual page 33

3
For Synchronized Transfer:
When playback is stopped, hold down
SHIFT, then press PLAY MODE on
the remote control repeatedly to select
the play mode you want.
Notes
• If you start transferring in [FOLDER
(SHUFFLE)], the selected play mode
changes to [FOLDER] automatically.
• If you start transferring in Shuffle Play
(other than [FOLDER (SHUFFLE)]),
Repeat Play or Program Play with no
steps, the selected play mode changes to
Normal Play automatically.
For REC1 Transfer:
Select the track or audio file you want
to transfer then start playback.
4
Press REC TO USB B.
"PUSH ENTER" appears in the
display panel.
5
Press ENTER.
The transfer starts when "DON'T
REMOVE" appears in the display
panel.
For Synchronized Transfer:
When the transfer is completed, the
transfer source and the USB device
stop automatically.
For REC1 Transfer:
When the transfer is completed, the
disc or the USB device continues to
play.
Transferring analog audio
(Analog Transfer)
You can transfer sound from an analog
audio source (other than DVD/CD, USB
or Bluetooth function) to a USB device.
Use the buttons on the unit to perform this
operation.
1
Connect a transferable USB
device to the
2
Press TUNER/BAND or AUDIO IN
repeatedly to select the source
you want to transfer.
3
Press REC TO USB B.
"PUSH ENTER" appears in the
display panel.
4
Press ENTER.
The transfer starts when "DON'T
REMOVE" appears in the display
panel.
5
Start playback the source.
To stop transferring
Press x.
To create a new MP3 file
Press REC TO USB B during Analog
Transfer.
"NEW TRACK" appears in the display
panel.
A new MP3 is also created automatically
after approximately 1 hour of transfer.
Notes
• When a new MP3 file is created, transfer is
disabled for the time being.
• If you press REC TO USB B again after a few
seconds, a new MP3 file can be created.
B port (page 32).
GB
33