Canon IXUS 245 HS User Manual page 67

• If you chose [PIN Method] in step 5, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user guide included
with your access point.
• To add multiple computers, repeat the above procedures starting from step 1.
•
To complete the registration, touch [^] in the upper right of the image
transfer screen that is displayed after connecting to the target computer in
step 7, and then touch [OK] in the confirmation screen.
Connecting to Access Points in the List
4
Choose an access point.
z z Touch an access point.
5
Enter an encryption key.
z z Touch inside the frame and a keyboard
will be displayed. Enter the encryption
key and touch [Next].
6
Choose [Auto].
z z
Touch [Auto].
A list of other devices connected to the
X X
access point will appear in the [Select a
Device] screen.
7
Choose a computer to connect
to.
z z
Choose the computer to connect to,
following step 7 – 8 on = 6 6. The
computer is now added to the list.
Connecting to a Computer
67