Temperature Controls; Performance Air Flow System - GE 21 Owner's Manual And Installation

About the temperature controls.
COLDER

Performance Air Flow System

The Performance Air Flow System is designed to maximize temperature control in the refrigerator and
freezer compartments. This unique special feature consists of the Air Tower along the top and back walls of
the refrigerator and the Air Tunnel on the bottom portion of the freezer rear wall. Placing food in front of
the louvers on these components will not affect performance. Although the Air Tower and the Air Tunnel
can be removed, doing so will affect temperature performance. (For removal instructions, on-line, 24 hours
a day, contact us at www.GEAppliances.com or call 800.GE.CARES. In Canada, contact us at
www.geappliances.ca or call 1.800.361.3400.)
ADJUST FREEZER TEMP
WARMER
9 IS COLDEST
The temperature controls are preset in the factory at 5 for both the
refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust controls,
allow 24 hours for the refrigerator to reach the temperature you
have set.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage, and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
www.GEAppliances.com
ADJUST REFRIGERATOR TEMP
COLDER WARMER
9 IS COLDEST
5