Playing back clips
Thumbnail screen
1
Set the POWER switch to ON. (Page 27)
•
The CAMERA lamp lights red.
2
Lower the POWER switch.
•
The PB lamp lights green.
3
Touch [Video/photo selection], and select
videos.
Video/photo selection
4
Touch the clip you want to play back.
•
Touch
or
to display the next (or
previous) page.
5
Touch the operation icons to operate
playback.
Operation icons
Play/pause
(
)
Fast reverse playback (slow reverse
playback)
Fast forward playback (slow motion
(
)
playback)
Stop playback and return to thumbnail
screen
Display direct playback bar (Page 73)
•
The operation icons disappear after about 3
seconds without operation. Touch the screen to
display them again.
■
Changing the thumbnail screen display
Press the T (+) and W (-) zoom buttons (or zoom
lever) while thumbnails are displayed, to change
the display of the thumbnail screen in the following
sequence.
20 clip display←→9 clip display←→1 clip
display←→Clip properties display
•
The display returns to 9 clip display when you
turn off the camera or switch modes.
•
You can also perform the same operation with
the zoom lever.
•
Clips that are displayed in the thumbnail
screen with a red frame or red number cannot
be played back due to the playback format
being incorrect. Change the playback format.
For details, see "Set playback format".
(Page 74)
•
An SD Memory Card on which 1,000 or more
clips are recorded becomes a dedicated playback
card, and the clips cannot be deleted. To delete
a clip, use the dedicated AVCCAM Viewer.
(Page 120)
71