Honda Accord Coupe 2016 Owner's Manual page 534

Brake Light, Back-Up Light, Rear Turn Signal Light
Bulbs and Rear Side Marker/Taillights
When replacing, use the following bulbs.
Brake Light: 21 W
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
Rear Side Marker/Taillight: LED
Cargo Hook Tabs
Holding Clip
Bulb
Socket
uuReplacing Light BulbsuBrake Light, Back-Up Light, Rear Turn Signal Light Bulbs and Rear Side Marker/Taillights
1. Remove the cargo hook by squeezing the
tabs on both sides.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
3. Turn the socket counter-clockwise and
remove it.
4. Remove the old bulb and insert a new bulb.
1Brake Light, Back-Up Light, Rear Turn Signal Light Bulbs and
Rear Side Marker/Taillights
Rear side marker/taillights are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it is
flat.
I n f o r ma t i o n P r o v i d e d b y :
Clip
Push until the
pin is flat.
533