Table of Contents
Advertisement
9. The LPR port will then be added automatically to the list of available
ports and will be selected as the current port.
10. Click OK to complete the port installation.
Configuring the TCP/IP Printer Port in
Windows NT 4.0
By default, your printer is installed on LPT1 — the physical printer port
of your computer. To print over the network, you must now install a
virtual port, and tell Windows to print over the virtual printer port rather
than the physical port.
1. From the Start button, select Settings and click Printers.
2. In the Printers folder, right-click the Tally T8106 or Tally T8406
printer you just installed and select Properties.
3. In the Printer Properties window, select the Ports tab.
4. Click the Add Port button to open the Printer Ports window.
5. In the Printer Ports window, select LPR Port and click New Port to
open the Add LPR Compatible Printer window.
6. In the Add LPR Compatible Printer window, enter the IP address of
your print server, enter PASS for your printer name, and click OK.
7. Click Close to close the Printer Ports window.
8. The LPR port will then be added automatically to the list of available
ports and will be selected as the current port.
9. Click OK to complete the port installation.
Chapter 3 Installing Printer Drivers and Utilities
45
Advertisement
Table of Contents
