Adjusting The Projection Angle; Adjusting The Focus; Warning Indicators - ViewSonic PJ350 User Manual

Adjusting the Projection Angle

Adjust the projection angle using the Height Adjustment button. See also KEYSTONE under the
Image-I Menu, page 12.
To adjust the projection angle, do the following:
Press the Height Adjustment button with one hand, while tilting the projector with the other hand.
1
The Foot Adjuster will extend accordingly. See Figure 4 below.
When the desired projection angle is reached, release the Height Adjustment button. This locks
2
the Foot Adjuster into place.
Height Adjustment
button

Adjusting the Focus

To adjust the focus, rotate the Focus Ring on the lens as shown below. The projector can focus within
the range of 3.3 feet to 39.4 feet (1m to 12m).

Warning Indicators

• When the Lamp LED is solid orange, change the lamp unit. See page 20 for instructions.
• When the Temp (Temperature) LED is solid orange, the projector has overheated. It will
automatically shut down. Under normal conditions, the projector can be switched on again. If the
problem persists, contact your local dealer for service or contact ViewSonic Customer Support.
See page 21.
Foot adjuster
Figure 4: Projection Angle Adjustment
Zoom Ring
Focus Ring
ViewSonic PJ350 7