Forward-Facing Installation With Vehicle Seat Belts - Graco MySize 65 Owner's Manual

FORWARD-FACING INSTALLATION
WITH VEHICLE SEAT BELTS
WARNING
LATCH belts MUST be stored when
using vehicle seat belt to install child
restraint.
Please refer to p.41, "Vehicle Seat Belts"
to determine what type of vehicle seat
belt is in your vehicle.
1. Store rear-facing
LATCH belt as shown (a). Pull out on
handle on front of child restraint (b)
and adjust to
2. Unhook tether from tether storage, see page 49.
3. Place forward-facing
Slide child restraint back until the restraint is in contact with
the vehicle seat back.
4. Thread vehicle seat belt through
and forward-facing
forward-facing
on vehicle seat.
a
c
position 2 or 3 (c).
forward-facing
26
b
d
openings and buckle belt (d).