Delete A Personal Announcement; Remote Access - iDect eclipse 8035 Owner's Manual

11.6.3

Delete a Personal Announcement

If you want to return to using the default announcement, simply delete
your personal announcement.
- On Your ECLIPSE Handset
1. From the home screen, press
2. Press
3. Press
select.
4. Press
and then press
5. Press
The default pre-recorded announcement plays through the
•
phone's speaker.
Press
•
privately over the earpiece.
6. Press

11.7 Remote Access

The phone lets you listen to the messages on your answering machine, or
otherwise operate your answering machine by calling in to your
answering machine from another touch-tone phone.
You need to enter a remote access code (same as your Master PIN) to
access your answering machine remotely.
The remote access code is used to prevent unauthorised access of your
answering machine.
Remote Access must be enabled if you want to use this feature.
(See on page 53.)
again to select ANS. SYSTEM.
/ to ANNOUNCEMENT and then press
/ to select ANSWER ONLY or RECORD MSGS
to confirm.
/ to DELETE and press
if you wish to listen to the announcement
to return to standby mode.
.
59
to
to confirm.