Jeep 2014 Compass Owner's Manual page 127

established, press and hold the
hear a double beep, indicating that the two calls have
been joined into one conference call.
Call Termination
To end a call in progress, momentarily press the
ton. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active
call. If the active call is terminated by the phone far
end, a call on hold may not become active automati-
cally. This is cell phone-dependent. To bring the call
back from hold, press and hold the
hear a single beep.
Redial
• Press the
button to begin.
• After the "Ready" prompt and the following beep, say
"Redial."
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125
• The Uconnect® Phone will call the last number that
button until you
was dialed from your mobile phone.
NOTE: This may not be the last number dialed from the
Uconnect® Phone.
but-
Call Continuation
Call continuation is the progression of a phone call on the
Uconnect® Phone after the vehicle ignition has been
switched to OFF. Call continuation functionality avail-
able on the vehicle can be any one of three types:
button until you
1. After the ignition is switched to OFF, a call can
continue on the Uconnect® Phone either until the call
ends, or until the vehicle battery condition dictates
cessation of the call on the Uconnect® Phone and
transfer of the call to the mobile phone.
3