Table of Contents
Advertisement
DISASSEMBLY OF THE SAFETY THERMOSTAT AND
To gain access to the safety thermostat and the protection thermostat it is sufficient to:
- Disassemble the rear panel.
- Unscrew the nut which secures the thermostat, located inside the oven compartment.
- Disconnect the connection wires, marking the various positions. (see Fig. 48).
Fig. 48
1 - SAFETY THERMOSTAT
5 - GRILL HEATER ELECTRICAL CONNECTORS
3 - PROTECTION THERMOSTAT
To remove the oven bottom, from inside the oven it is sufficient to loosen the two fixing screws and lever up
in order to disengage the two front tabs (vedi Fig. 49).
Fig. 49
1 - OVEN BOTTOM
2 - REAR TABS
3 - FRONT TABS
TSE-P 10.00 FV
THE PROTECTION THERMOSTAT
REMOVAL OF OVEN BOTTOM
33/38
599 34 41-93
Advertisement
Table of Contents
