Channels - Mitsubishi Electric C10 SERIES Owner's Manual

Cha nnels
Use the TV's channel menus to:
• Save a list of favorite channels (see
• Define the source for the antenna input
• Perform a channel scan
CH /CH
• Limit tuning to only the channels you want
• Selectively scan for new channels
• Add a single channel by RF channel number
Favorites
See page 10 for use of the Favorites menu.
Editing the Channel List
• Use the Channel Edit menu so the TV tunes only to
the selected channels when using the CH /
• Channels marked with a check are in memory.
• Press to move through channel numbers one
at a time.
• To add or delete a channel from
the channel number and press ENTER to remove the
check.
• To jump to a channel, enter the channel number,
including separator, and press ENTER. For example,
to jump to 36-1: 3
• Use the Mark All or Unmark All options if working
with many channel numbers.
Enter the channel number to jump quickly to a channel.
Checked channels can be tuned with the CH /
page 10 ).
key .
memory, highlight
1 ENTER.
6
key.
3. TV Menus
Changing the Channel Source
Highlight the source connected to the TV's antenna
input.
• Air if you have an over-the-air antenna
• Cable if you have direct cable service without a
box.
Press ENTER to confirm your selection.
Scanning Channels
Perform a channel scan after
• Initializing the TV
• Changing the source (switching between an over-
the-air antenna and direct cable service)
• Repositioning the antenna
• Transporting the TV to a different area
The channel scan will erase all custom channel settings
(channel locks, favorite channels, channel-list edits).
Note: Additive Scan must be OFF to enable a full
channel scan.
For assistance call 1(800) 332-2119
23