Menu Operation - Mitsubishi Electric XL9U User Manual

Menu operation

IMAGE
INSTALLATION
FEATURE
SIGNAL
* 1: Not available when sRGB is set to ON.
* 2: Not available with certain signals.
* 3: Not available when the source is a VIDEO
or S-VIDEO signal.
* 4: Available only when the input signal is TV60 or 480i.
* 5: Setting range differs depending on the input signals.
Basic operation
Several settings can be adjusted using the menu.
Example: Auto power off time setting
1. Press the MENU button.
opt.
IMAGE
2. Press the $ or % button to select
INSTALLATION.
opt.
INSTALLATION
3. Press the ENTER button (or } button).
opt.
INSTALLATION
AUTO POWER
ON
AUTO POWER
OFF
CONTRAST ± 30
BRIGHTNESS ± 30
sRGB ON , OFF
*1
COLOR MATRIX VIDEO
COMPUTER
USER
OFF
*1
COLOR TEMP. STANDARD
LOW
HIGH
USER
*1
COLOR ± 10
TINT *1 *2 ± 10
*2
SHARPNESS ± 5
*1
GAMMA MODE AUTO, DYNAMIC, STANDARD, THEATER
AUTO POWER ON
ON , OFF
AUTO POWER OFF
OFF, 5, 10, 15, 30, 60 min
IMAGE CAPTURE *3
SETUP BACK COLOR
SIZE
CAPTURE
SPLASH SCREEN ON , OFF
BACK COLOR BLUE, BLACK, IMAGE
MUTE MODE BLACK, IMAGE
LAMP MODE STANDARD, LOW
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
MENU POSITION 1 (Upper left), 2(Lower right)
EXPAND MODE EXPAND, REAL
AUDIO MODE COMPUTER, VIDEO, COMPUTER VIDEO, MUTE
*4
CINEMA MODE AUTO , OFF
VIDEO SIGNAL AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
SCART INPUT *3 ON , OFF
ANAMORPHIC OFF, CENTER, UPPER, LOWER
PASSWORD FUNCTION DISPLAY INPUT
, English, Español, Deutsch, Français, Italiano,
LANGUAGE
RESET ALL OK
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. *3 0 - 31
TRACKING *3 0 - 9999
*3 *3
COMPUTER INPUT RGB, YC C / YP
B R
HOLD *3 ON
OFF
USER OK
XGA60
XGA60
XGA60
OFF
OFF
RED ± 30
YELLOW ± 30
GREEN ± 30
CYAN ± 30
BLUE ± 30
MAGENTA ± 30
RGB-TINT ± 20
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R ± 30
BRIGHTNESS B ± 30
(Displayed only when the source is VIDEO or S-VIDEO.)
(Displayed only when the source is VIDEO or S-VIDEO.)
GLAY, RED, GREEN, BLUE, BLACK, WHITE, RED 50%, GREEN 50%, BLUE 50%
x1, x2, FULL
GO
, MENU ACCESS , SPLASH ID SCREEN
*5
*5
*5
P
B R
BEGIN 0 - 15
END 0 - 15
CLAMP POSITION 0 - 63
*3
CLAMP WIDTH 1 - 63
*3
VERT. SYNC. AUTO, OFF
SHUTTER (U) 0 - 20
SHUTTER (L) 0 - 20
SHUTTER (LS) 0 - 20
SHUTTER (RS) 0 - 20
4. Press the { or } button to select AUTO
POWER OFF.
AUTO POWER
ON
AUTO POWER
OFF
5. Press the $ or % button to adjust the auto
power off time.
AUTO POWER
ON
AUTO POWER
OFF
6. Exit the menu by pressing the MENU button
several times.
Important:
• When the MENU button doesn't function,
unplug the power cord from the wall outlet.
Wait about 10 minutes, plug the power cord in,
and try again.
• After selecting the items marked with
the ENTER button.
(These items are not available when the input
source is COMPUTER.)
LOCK OK
UNLOCK OK
, , ,
*5
*5
OFF
OFF
OFF
30 min
, press
EN – 15