Disassembly - Sharp CD-XP120 Service Manual

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
CD-XP120
REMOVAL
STEP
1 Top Cabinet 1. Screw ...................... (A1) x4
2 Side Panel 1. Screw ...................... (B1) x6
(Left/Right)
3 CD Player Unit 1. Turn on the power supply, ..
2. CD Tray Cover ........ (C1) x1
3. Hook ........................ (C2) x2
4. Socket ..................... (C3) x4
4 Rear Panel 1. Screw ...................... (D1) x6
5 Main PWB 1. Screw ...................... (E1) x5 5-2,5-3
2. Socket ..................... (E2) x7
6 Front Panel 1. Screw ....................... (F1) x3
2. Hook ......................... (F2) x2
7 Switch A PWB 1. Screw ...................... (G1) x3
2. Socket ..................... (G2) x1
8 Display PWB 1. Screw .................... (H1) x10
9 Tape Mechanism 1. Open the cassette holder.
2. Screw...................... (J1) x8
10 Headphones PWB 1. Screw ...................... (K1) x1
11 Turntable 1. Screw ....................... (L1) x1
2. Spacer ...................... (L2) x1
12 Loading Tray 1. Push forward the loading tray.
2. Inserting the flat head into the
13 CD Servo PWB 1. Screw ...................... (N1) x3
(Note 1) 2. Socket ..................... (N2) x5
14 Switch B PWB 1. Screw ...................... (P1) x2
15 CD Mechanism 1. Screw ...................... (Q1) x4
2. Spring ...................... (Q2) x4
Note 1:
1. After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.

DISASSEMBLY

PROCEDURE
open the disc tray, take out
the CD tray cover, and close.
hole, push in the direction indi-
cated by the arrow. ... (M1) x2
CD-XP120
(A1)x2
ø3x16mm
Side Panel
(Right)
(B1)x2
ø3x10mm
FIGURE
5-1
5-1
(B1)x2
ø3x8mm
5-2
5-3
(C2)x1
5-2
Pull
5-3
5-3
6-1
Rear
Panel
6-1
6-1
6-1
6-2
6-2 (D1)x4
ø3x8mm
6-3
6-3
6-4
(F2)x1
(E2)x2
(E2)x2
Power
PWB
– 5 –
Top Cabinet
Rear
Panel
Figure 5-1
CD Player
Unit
2
1
(E1)x1
ø3x10mm
(D1)x1
ø3x10mm
Figure 5-2
(C3)x3
(E1)x2
ø3x10mm
(C3)x1
(E2)x3
Figure 5-3
CD-XP120
Front
Panel
(A1)x2
ø3x16mm
Side Panel
(Left)
(B1)x2
ø3x10mm
(C1)x1
1
2
(C2)x1
Pull
Front
Panel
(E1)x2
ø3x8mm
Main PWB
(D1)x1
ø3x10mm
Front
Panel
Main PWB
(F2)x1
(F1)x3
ø3x6mm