CONTENTS Handling the remote controller ............Remote controller Specifications........... Function buttons ................Indicators on LCD ................How to use the buttons ..............Auto operation................. Cooling/Heating/Fan operation............Dehumidifying operation ............... Swing operation................Timer operation................ECO operation ................
Handling the remote controller Location of the remote controller. Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. CAUTIONS The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit.
CAUTIONS Do not mix old and new batteries or batteries of a different type. Do not leave the batteries in the remote controller if it is not going to be used for 2 or 3 months. Dispose of the old batteries in the special containers to be found in the sales outlets.
TEMP UP Button Function buttons Push this button to increase the indoor temper- ature setting in 1 C increments to 30 C. TEMP DOWN Button Push this button to decrease the indoor temper- SET TEMPERATURE( C) ature setting in 1 C increments to 17 C. AUTO COOL HIGH...
Page 6
Function buttons(continued) TIMER ON Button Press this button to activate the Auto-on time setting. Each press will increase the time setting SET TEMPERATURE( C) in 30 minutes increments, up to 10 hours, then at AUTO HIGH COOL 1 hour increments up to 24 hours. To cancel the Auto-on time setting, just press the button until HEAT the time setting is 0.0.
Indicators on LCD MODE display Displays the current selected mode. Including AUTO, COOL, DRY, HEAT(cooling & heating models only) and FAN. Transmission Indicator This transmission indicator will light when remote controller transmits signals to the indoor unit. Temp./Timer display The temperature setting (from 17 C to 30 C) or timer setting (0~24h) will be displayed.
How to use the buttons Auto operation SET TEMPERATURE( C) Ensure the unit is plugged in and power is AUTO available. The OPERATION indicator on the COOL HIGH display panel of the indoor unit illuminates. HEAT 1. Press the MODE button to select Auto. 2.
Dehumidifying operation SET TEMPERATURE( C) Ensure the unit is plugged in and power is available. The OPERATION indicator on the AUTO COOL HIGH display panel of the indoor unit illuminates. 1. Press the MODE button to select DRY mode. HEAT 2.
Timer operation press the TIMER ON button can set the auto-on time of the unit. And press the TIMER OFF button can set the auto-off time of the unit. To set the Auto-on time. 1. Press the TIMER ON button. The remote SET TEMPERATURE( C) controller shows TIMER ON, the last Auto-on AUTO...
Page 11
IMPORTANT The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
Page 12
TIMER OFF (Auto-off Operation) The TIMER OFF feature is useful when you want TIMER OFF the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. Example: Stop To stop the air conditioner in 10 hours. 1.
TIMER ON → TIMER OFF (Off → Start → Stop operation) This feature is useful when you want to start TIMER ON OFF the air conditioner before you wake up and stop it after you leave the house. Example: To start the air conditioner 2 hours after setting, and stop it 5 hours after setting.
Page 14
In case of quality problem or other please contact your local supplier or authorized service center. Emergency number: 112 PRODUCER Producer: SINCLAIR CORPORATION Ltd., 1-4 Argyll St., London W1F 7LD, UK, www.sinclair-eu.com This product was manufactured in China (Made in China).