Sony SLV-D900E Service Manual page 15

1
Press TIMER.
SUBTITLE/
TIMER
• When you set "TIMER METHOD" to
"VARIABLE":
The "TIMER METHOD" menu appears on
the TV screen. Press V/v to select
"STANDARD", then press ENTER.
ENTER
• When you set "TIMER METHOD" to
"STANDARD":
The "TIMER PROGRAMMING" menu
appears on the TV screen.
2
Set the date, start and stop times, programme
position, tape speed and PDC function:
ENTER
Press b to select each item in turn.
1
Press V/v to set each item.
2
To correct a setting, press B to return to that
setting and reset.
• To record the same programme every day or
the same day every week, see "Daily/weekly recording" on page 45.
INPUT
• To use the PDC function, set V/P to ON. For details about the PDC
SELECT
function, see "Timer recording with PDC signals" on page 40.
• To record from other equipment connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the "PR"
position.
Press O RETURN to confirm the setting.
3
The indicator appears in the display window.
RETURN
To enter another setting, press V/v to select the next row and repeat step 2.
CLEAR
Press CLEAR to cancel the setting.
Press O RETURN to exit the menu.
4
RETURN
Press ?/1 to turn off the DVD-VCR.
5
The indicator appears in the display window and the VCR stands by for
recording.
To record from other equipment, leave the connected equipment switched
on.
44
Recording TV programmes using the timer
To watch a DVD after setting the timer
1
Press SELECT DVD to control the DVD player.
Press Z and place the disc on the disc tray.
2
Press H.
3
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
Tips
• To set the channel, you can also use the V/v or number buttons.
• If the indicator appears, this means that the VCR is currently recording this programme.
• You can also do the following tasks while the VCR is recording:
– Reset the counter (page 32).
– Display tape information on the TV screen (page 35).
46
Recording TV programmes using the timer
TI M ER M ET HOD
ST AN DAR D
VI DEOPLUS
vV
RETURN ENTER
PR DAY START STOP V/P
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
vV b B
RETURN CLEAR
PR DAY START STOP V/P
3 5 – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
– – – – – – – – : – – – – : – – – – –
vV b B
RETURN CLEAR
Checking/changing/cancelling timer
settings
Before you start...
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Press SELECT VIDEO to control the
VCR.
• To record from a satellite or digital tuner,
turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the "SETUP MENU." Stop
the DVD playback.
• Set "TIMER METHOD" to
"STANDARD" or "VARIABLE" in the
"USER SET" menu (see page 95).
1
1-10
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press x.
Daily/weekly recording
In step 2 above, press v to select the recording pattern. Each time you press v, the
indication changes as shown below. Press V to change the indication in reverse order.
today t DLY (Monday to Sunday) t W-SA (every Saturday) ..... t
W-SU (every Sunday) t 1 month later t (dates count down) t today
To use the Auto Tape Speed function
In step 2 above, press v to select "AUTO." When you are recording a programme in
the SP mode and the remaining tape length becomes shorter than the recording time,
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the "Tape Select" setting in the "VIDEO FUNCTION SETUP"
menu must be accurate (see page 90).
Tips
• To set the line input video source, you can also use the INPUT SELECT button.
• Even if you set " TIMER METHOD " to " VIDEOPLUS
set the timer manually. Press SET UP to select TIMER PROGRAMMING, then go to step 2.
• To check, change, or cancel the programme setting, see "Checking/changing/cancelling timer
settings" on page 47.
Notes
• When setting the timer with PDC signals, enter the start times exactly as indicated in the TV
programme guide. Otherwise, the PDC function will not work.
• If the PDC signal is too weak or the broadcasting station failed to transmit PDC signals, the
VCR will start recording at the set time without using the PDC function.
indicator flashes in the display window when you press ?/1 with no tape inserted.
• The
To watch another TV programme after setting the timer
1
Press TV/VIDEO to display "TV" in the display window.
2
If your TV is connected to the VCR using A/V connections, set the TV to the
TV's aerial input; if not, skip this step.
3
Select another channel on the TV.
Recording TV programmes using the timer
Press SET UP when the DVD player is in stop
SET UP
mode.
The "SETUP MENU" appears.
Checking/changing/cancelling timer settings
" in the " USER SET " menu, you can
continued
45
?/1
SELECT
VIDEO
CLEAR
SET UP
V/v/B/b
ENTER
O RETURN
SETUP MENU
DVD SETUP
Vv b B
RETURN ENTER
continued
47