Turning On This Unit - Yamaha CD-N301 Owner's Manual

Turning on this unit

When you have established all cable connections, turn on this unit and other system components.
Press the power switch to turn this unit on.
With the power switch on, you can switch this unit to on or standby mode by pressing the power button on the remote
control.
When network standby mode is enabled, you can also control the power etc. from a network device.
❚ Operable functions in standby/network standby
Standby
Network Standby
To enable network standby mode, set "System Config" → "Network Standby" to "On" from the setup menu (☞ P.23).
y
When no operations are performed for a specific length of time, the unit automatically switches to standby mode (auto power standby).
You can set the time to switch to standby mode in "System Config" → "AutoPowerStdby" from the setup menu (☞ P.23).
SOURCE PURE DIRECT
CD eject
Operable
Operable
SELECT
ENTER PUSH
Power-on by the
AirPlay
—
Operable
CONNECTIONS
RETURN
application
—
Operable
11
En