Mitsubishi Electric XD470U User Manual page 11

Projector + Computer
For computer with Mini D-SUB
AUDIO IN
MONITOR OUT
Necessary when outputting to both
a PC monitor and the projector.
For analog connection:
1. Connect one end of the supplied RGB cable to the COMPUTER IN terminal (1, 2) of the projector.
2. Connect the other end of the RGB cable to the monitor port of the computer.
For monitor connection:
Connect the RGB cable from the monitor to the MONITOR OUT terminal of the projector.
Important:
• When you use a longer RGB cable instead of the provided cable, the image may not be projected correctly.
• Some computers require additional connectors or analog RGB output adapters to be connected with this projector. Contact your dealer for fur-
ther information.
• This projector uses stereo pin jack for its audio input. Check the type of the audio output terminal of the connected computer and prepare a
proper cable for connection. Some computers don't have the audio output terminal.
• Speaker output is mono.
• When the audio cable is connected to the AUDIO OUT terminal, the speaker output is muted.
For Macintosh
• If your Macintosh has no video port, a monitor output adapter is required. Contact your dealer for further information.
• Some Macintoshes require a MAC adapter for the RGB cable for connection with this projector. Contact your dealer for further information.
COMPUTER IN
AUDIO OUT
Audio cable (option)
RGB cable for PC (option)
PC audio cable (option)
RGB cable for PC
to PC audio output
Computer
to monitor port
AUDIO OUT
MONITOR OUTPUT
EN-11