Safety Considerations; Installation Instructions - Baumatic BAU95EE Instruction Manual

Before connecting your new cooker
Before using your new cooker, please read these 'Instructions for Use' carefully. They
contain important information concerning your personal safety as well as on use and care
of the oven.
Please keep the operating and installation instructions in a safe place; this important
documentation may also be of use to a possible subsequent owner.
Do not use the cooker if it is damaged in any way.
Installation and connection of the cooker should be performed according to the instructions
and connection diagram provided, and should be entrusted to a licensed specialist. In the
event of a damage that occurs as a result of improper connection, the warranty will be
void.
Our appliances meet the applicable safety regulations for electrical appliances, Repairs
may be performed only by authorised persons. Inexpert repairs may entail serious injury to
you, the user

Safety considerations

Never leave the appliance unattended when cooking with fat or oil. It could ignite if
overheated.
In case of a defect, switch off at the mains.
Do not clean the oven with steam or high pressure cleaners
Ensure that the power cord does not get caught in the hot oven door. The plastic insulation
could melt.
Do not use loose greaseproof paper in the oven (e.g. when heating the oven). The paper
could be drawn to the fan and damage the fan and the element
Do not insert a baking sheet or aluminium foil sheet at the bottom of the oven. A heat
build-up could result and cooking times and temperatures could change or enamel could
be damaged.
Do not pour water on the hot oven floor. Damage to enamel could result
Always piace a baking tray below a roast to prevent juices from dripping on the oven lining
Do not place heavy items on the oven door when open as this may result in damage to the
door hinges
To ensure correct cooking the oven door must dose properly.
Keep the door sealing surfaces clean at all times
Statutory regulations
This appliance shall
instructions, local gas fitting regulations, municipal building codes, electrical wiring
AS 5601
regulations,
for pipe sizing tables
Gas supply
Check that the data plate shows the appliance is suitable for the available gas supply. The
data plate is located on the inside of the oven door, centre bottom.
plates is
reproduced on the last page of this booklet.

Installation instructions

be installed in
the Australian Standard for gas installations. Refer also to AS 5601
with the manufacturer's installation
accordance
A copy of the data