Mitsubishi Electric XD420U SD420U User Manual page 17

3 FEATURE
MENU POSITION ...................................... Use to select the position of the menu on the screen, 1.
CINEMA MODE ......................................... When AUTO is selected, the film mode will be automati-
VIDEO SIGNAL.......................................... When AUTO is selected, the appropriate video format is
ANAMORPHIC........................................... Select ON when playing DVD discs containing data of
PASSWORD FUNCTION ............................. Use to change the mode of the password lock or to enable or cancel the password lock. See page 21
LANGUAGE ............................................... Use to select the language used in the menu. (
RESET ALL................................................ Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).
• CINEMA MODE can be adjusted only when a TV50, TV60, 480i, 576i signal is being displayed.
• When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depend-
ing on the input signal in such cases.
4 SIGNAL
HORIZ. POSITION..................................... Use to adjust the horizontal position of the image.
VERT. POSITION ....................................... Use to adjust the vertical position of the image.
FINE SYNC. .............................................. Use to synchronize the projector with the PC input signal
TRACKING................................................. Use to eliminate image noise such as wide stripes.
COMPUTER INPUT .................................. The projector adjusts its settings automatically when
SET UP ...................................................... When OFF is selected, the black area becomes make
HOLD ........................................................ Use to adjust the image when flagging occurs near the top of the screen.
5 SIGNAL - USER (No need to adjust in normal use.)
CLAMP POSITION/
CLAMP WIDTH .......................................... Use to correct solid white or solid black in the projected
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.
(upper left) or 2. (lower right).
cally activated when a film source signal is inputted.
When OFF is selected, the film mode will not be acti-
vated.
automatically selected depending on the input signal. If
the image isn't displayed correctly, select the desired
video format manually.
widescreen images.
for details.
iano / / /
so that the image is not blurred.
connected to a DVD player equipped with a component
video output (Y, C , C ). When the projector is connected
B R
with a device having an RGB terminal, choose RGB
manually.
lighter. When 3.5% or 7.5% is selected, the black area
becomes thicker.
image.
FEATURE
MENU POSITION
CINEMA MODE
?
VIDEO SIGNAL
ANAMORPHIC
PASSWORD
FUNCTION
A LANGUAGE
Ë
RESET ALL
/ English / Español / Deutsch / Français / Ital-
/ PORTUGUÊS).
SIGNAL
HORIZ. POSITION
VERT. POSITION
FINE SYNC.
TRACKING
COMPUTER
INPUT
R G B
R G B
SET UP
HOLD
USER
USER
CLAMP
POSITION
CLAMP WIDTH
opt.
XGA60
1.
AUTO
AUTO
ON
MENU ACCESS
English
OK
opt.
XGA60
0
0
0
0
RGB
7.5%
ON
OK
0
1
EN-17