Features; Assembly - Craftsman 315.CR2100 Operator's Manual

prOdUCT SpeCIFICaTIONS
Motor ........................................................................................................................................................................19.2 V DC
Air Velocity:
MPH ................................................................................................................................................................................140
Weight (without battery pack) ........................................................................................................................................ 3.1 lbs
KNOw YOUr BLOwer
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
UNpaCKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
:
warNING
Do not use this product if any parts
on the Packing List are already assembled to your
product when you unpack it. Parts on this list are not
assembled to the product by the manufacturer and
require customer installation. Use of a product that
may have been improperly assembled could result in
serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
paCKING LIST
Blower
High Velocity Nozzle
Lower Blower Tube
Upper Blower Tube
Operator's Manual

FeaTUreS

BLOwer TUBeS
The blower tubes can be installed on the blower without
using any tools.
OVerMOLd HaNdLe
Ergonomic handle with overmold improves comfort and
grip.

aSSeMBLY

warNING
not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
warNING
or create accessories not recommended for use with
this product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
warNING
could cause serious personal injury, always remove
the battery pack from the product when assembling
parts.
aSSeMBLING THe BLOwer TUBe
See Figure 2.
 With the logo area facing up, slide the upper blower
tube over the outlet on the blower housing.
 Press down on the tab on the blower housing outlet.
 Push upper blower tube on the blower housing outlet
until tab locks into place through the opening in the
upper blower tube.
 Install lower blower tube onto the end of the upper
blower tube with the notch facing up. Slide the lower
blower tube forward until tab locks into place through
the opening in the lower blower tube.
 To remove the blower tubes, push tab in and slide tube
off.
7 — English
:
If any parts are damaged or missing do
:
Do not attempt to modify this product
:
To prevent accidental starting that