Yard Works 060-3874-8 Owner's Manual page 20

OPERATING INSTRUCTIONS
AIR VENTS
Never cover air vents. Keep them free of obstructions and debris. They must always
remain clear for proper motor cooling.
WARNING
or articles such as scarves, strings,chains, ties, etc., that could get drawn into the air
vents. Tie back long hair to make sure it does not get drawn into the air vents.
OPERATING AS A BLOWER
Hold the blower firmly. Sweep from side to side with the nozzle several inches above
the ground or floor. Slowly advance the unit, keeping the accumulated pile of debris in
front of you. Most dry blowing operations are better suited to low speeds, rather than
high speeds. High-speed blowing is a better way to move heavier items like large
debris or gravel.
OPERATING AS A MULCHER
Hold the vac firmly, tilting the mulcher tubes (2-4 in. or 5-10 cm), and use a sweeping
action to collect light debris. The debris will flow into the bag. Items such as small
leaves and twigs will be mulched as they pass through the fan housing. For longer bag
life and increased performance, empty the bag often.
CLEARING A BLOCKED TUBE / IMPELLER
WARNING
unplugged before clearing the impeller.
WARNING
yourself from the impeller blades or other sharp objects.
1. Slide the Power/Speed switch down to the OFF position, and wait until the unit
comes to a complete stop.
2. Unplug the unit.
3. Remove the blower tube or mulcher tubes and the bag.
4. Carefully remove material blocking the tube or impeller. Inspect the blades to ensure
that no damage has occurred. Rotate the impeller blades by hand to ensure that the
blockage is completely cleared.
5. Reinstall the blower tube or mulcher tubes and the bag.
6. Plug the unit back into the power supply.
STOP! Blower will not run until gate is closed and locked!
To avoid serious personal injury, do not wear loose-fitting clothing
To avoid serious personal injury, be sure the unit is OFF and
To avoid serious personal injury, always wear gloves to protect
20