Registration (Pairing) - Motorola MBP843CONNECT User Manual

Hide thumbs Also See for MBP843CONNECT:
Table of Contents

Advertisement

5. To turn off the Parent Unit, press and hold the
button until the progress bar finishes scrolling.
NOTE
The battery icon
indicate that the battery is low and needs to be recharged. The battery pack
takes about 16 hours to charge fully.
When charging
1.
During charging, the battery icon at the top right of the screen indicates that it is
charging. If the Parent Unit is powered off while charging, a power plug icon is
displayed for 5 seconds, followed by a battery icon for 45 seconds. The Blue LED
at the top left corner lights up to indicate that the power adapter is plugged in.
2.4

Registration (Pairing)

The Camera Unit is pre-registered to your Parent Unit. You do not need to
register it again unless the Camera Unit loses its link with the Parent Unit.
To re-register your Camera Unit, or register a new Camera Unit, follow the
procedure below:
M
1. Press the
button of the Parent Unit and the menu bar will pop up.
<
2. Press the
LEFT button or
The
+
3. Press the
UP button or
O button to confirm.
+
4. Press the
UP button or
and press the O button to start searching for a camera unit. The green
audio level LED will flash rapidly while searching.
5. Press the O button to confirm.
6. Press and hold the PAIR button underneath the Camera Unit until the
Parent Unit finds the camera, beeps and the video from the camera
appears.
NOTE
If a particular Camera Unit was registered previously, registering this current
Camera Unit again will overwrite the old registration.
Getting Started
turns RED and the unit emits a beep every 16 seconds to
>
RIGHT button until
menu will pop up.
-
DOWN button to select
will pop up.
-
DOWN button to select the desired Camera
P
POWER ON/OFF
is highlighted.
, and press the
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbp843connect-4Mbp843connect-2Mbp843connect-3

Table of Contents