Automatic Program Switch (Autophone) - Siemens Nitro micon BTE User Manual

Automatic program switch (AutoPhone)

Your hearing instrument can automatically select the
telephone program when you hold the telephone receiver
close to the ear. When you end the phone call, the
previously used program is activated.
If you want to use this function, ask your Hearing Care
Professional to do the following:
Activate the AutoPhone function.
■
Check the telephone receiver's magnetic field.
■
For the automatic program switch, your hearing
instrument detects the telephone receiver's magnetic
field. Not all telephones produce a magnetic field
strong enough to activate the AutoPhone function.
In this case, you can use the Siemens AutoPhone
magnet, which is available as an accessory, and
attach it to the telephone receiver.
NOTICE
See the AutoPhone magnet user guide for
instructions on how to position the magnet.
Use the approved AutoPhone magnet only.
Ask your Hearing Care Professional for this
accessory.
On the phone 27