Power light
Status light
Blue
Flashing blue
Flashing blue
Varies
Off
Flashing blue
Lamp light Temp light
Off
Off
Off
Flashing
orange
Off
Orange
133
Status and solution
Shutting down; when the Status
light stops flashing, you can unplug
the projector
Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Projector has overheated and
turned off; leave it turned off to cool
down for about five minutes, then do
the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help