Samsung SyncMaster 460DR-2 User Manual page 127

Hide thumbs Also See for SyncMaster 460DR-2:
Table of Contents

Advertisement

Environmental considerations
Operating (Without Network
Box)
Storage
Plug and Play Capability
This product can be installed and used with any Plug-and-Play compatible systems. Two-
way data exchange between the product and PC system optimizes the product settings.
product installation takes place automatically. However, you can customize the installation
settings if desired.
Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology with preci-
sion of 1ppm (one millionth) above are used for this product. But the pixels of RED,
GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may
be seen. This is not from bad quality and you can use it without any problems.
For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800.
Note
Design and specifications are subject to change without prior notice.
Attaching a Samsung ID (videowall kit) will increase the weight of an LFD by 1.6 kg.
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm)
may appear brighter or darker on the panel. This does not affect product performance.
Class A (Information Communication equipment for industrial use)
Attention dealers and users. This device is registered for EMC requirements for industrial use (Class
A) and can be used in areas other than general households.
(USA Only)
Dispose unwanted electronics through an approved recycler. To find the
nearest recycling location, go to our website, www.samsung.com/recy-
clingdirect, or call (877) 278 - 0799
PowerSaver
This LCD Display has a built-in power management system called PowerSaver. This system saves
energy by switching your LCD Display to low-power mode when it has not been used for a certain
amount of time. The LCD Display automatically returns to normal operation when you press a key on
the keyboard. For energy conservation, turn your LCD Display OFF when it is not needed, or when
leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant
video card installed in your computer. Use the software utility installed on your computer to set up this
feature.
Specifications
Humidity : 10 % ~ 80 %, non-condensing
Temperature : 32°F ~ 104°F (0°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing

Advertisement

Table of Contents
loading

Table of Contents