Compass; Compass Calibration - Honda 2013 Odyssey Owner's Manual

Compass

*
When you turn the ignition switch to ON
compass display appears.

Compass Calibration

If the compass indicates the wrong direction, or the compass display blinks, you
need to manually calibrate the system.
* Not available on all models
( w , the compass self-calibrates, and the
1. Turn the ignition switch to ON
2. Press and hold the SETUP button until the
display shows the compass setting menu
list.
3. Rotate to select Calibration, then press
.
4. When the display changes to Start
Calibration, press .
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
1Compass *
Compass calibration can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
( w .
are mounted by magnets
1Compass Calibration
Calibrate the compass in an open area.
While setting the compass:
•
The RETURN button returns to the previous screen.
•
The SETUP button cancels the setting mode.
277