Chevrolet 2016 Impala Limited Owner's Manual page 251

250 Vehicle Care
Once you have removed the wheel
cover, use the following procedure
to remove the flat tire and install the
spare tire.
1. Do a safety check before
proceeding. See If a Tire Goes
Flat 0 247 .
ii
2. Turn the wheel wrench
counterclockwise once on each
wheel nut to loosen it. Do not
remove them yet.
3. For all wheel types, find the
jacking location using the
diagram above and the
corresponding jacking notches
located on the bottom side of
the plastic molding. The
notches in the plastic molding
are marked with a triangle
shape to help you find them.
The front location is about
17.7 cm (7.0 in) from the rear
edge of the front wheel well.
The rear location is about
11.4 cm (4.5 in) from the front
edge of the rear wheel well.
4. Put the compact spare tire
near you.
Warning
Getting under a vehicle when it is
jacked up is dangerous. If the
vehicle slips off the jack you could
be badly injured or killed. Never
get under a vehicle when it is
supported only by a jack.
Warning
Raising the vehicle with the jack
improperly positioned can
damage the vehicle and even
make the vehicle fall. To help
avoid personal injury and vehicle
damage, be sure to fit the jack lift
head into the proper location
before raising the vehicle.
Warning
Lifting a vehicle and getting under
it to do maintenance or repairs is
dangerous without the
(Continued)