Table of Contents
Advertisement
1 Inserting/Removing Zinc Air Battery
Open the battery
1
door
To insert or replace the
battery, hold the main unit
and open the battery door
by placing a tip of your
forefinger under the edge
of the swing-out door and
gently pulling outward.
· Do not open the battery
door too far or damage is
likely to occur.
2
Insert the battery
Place the new battery in the
compartment with the plus (+) sign
facing up. Your hearing aid uses a
size 13 battery.
Adhesive peel tab
For removal,
turn the main unit
upside down and
pull out the
battery.
· Peel off the tab placed on the
plus (+) sign after the battery is
securely in place.
3
Close the battery door
Close the battery door
by swinging the door
until it snaps securely.
Never force the door
shut. This could result
in serious damage.
· If you keep the battery door shut, the
switch remains turned on, which can result
in a high-pitched squeal or feedback. Turn
the switch off before wearing the hearing
instrument. See Page 25.
· You can set up the amount of time until
audio output gets fully activated after
closing the battery door. For more
information, contact your dispenser.
21
Advertisement
Table of Contents
