Bypass Linkages; Fuel Shut Off Valve; Fuses - Dixon DX152 Operator's Manual

Bypass Linkages

the levers are located on each side of the rear of the
unit below the rear engine plate. the bypass linkage
is used when manually pushing or pulling the unit.
See Moving Machine By Hand in the Operation
section.
WARNING!
Bypass linkages are located close to the
muffler. To prevent burns, the engine
should be shut off and allowed to cool
before the bypass linkage levers are
handled.

Fuel Shut Off Valve

the fuel shut off valve is located at the right rear of the
seat. the valve has three positions: right tank, left tank
and OFF.

Fuses

Fuses are located on the left hand side of the
machine. they are accessed by tilting the seat
forward. Fuses are flat pin fuses type as used in
automobiles.
there are two fuses with ratings and functions of:
1. 20 A, Primary fuse
2. 7.5 A, Mower deck coupling
24
CONTROls
1. IZt locked into the bypass position
2. Release lever, engaged
Right side, ZT linkage
Fuel shut off valve in the CLOSED position.
Fuses
2
1
8065-061
8065-099
8011-420