Battery Function; Tools And Test Equipment - Motorola C113 Service Manual

Tools and Test Equipment

Battery Function

Tools and Test Equipment
Table 1: General Test Equipment and Tools
Motorola Part Number
See Table 6
0180386A82
8102430Z04
6680388B67
6680388B01
-
HP34401A2
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone at (800) 422-4210 or
FAX (800) 622-6210. Internationally, AAD can be reached by calling (847) 538-8023 or by fax (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
14
The telephone displays a battery charge indicator icon in the idle screen to indicate the battery
charge level. The gauge shows four levels: 100%, 66%, 33%, and Low Battery.
Removing the battery causes the phone to shut down immediately and loose any pending work
(partially entered phone book entries or outgoing messages, for example).
All batteries can cause property damage and/or bodily injury such as burns if a conductive
material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive
material may complete an electrical circuit (short circuit) and become quite hot. Exercise care
in handling any charged battery, particularly when placing it inside a pocket, purse, or other
container with metal objects.
If the battery is removed while receiving a message, the message is lost.
To ensure proper memory retention, turn the phone OFF before removing the battery.
Immediately replace the old battery with a fresh battery.
The table below lists the tools and test equipment used on C113 telephones. Use either the
listed items or equivalents.
1
Description
Charger
Antistatic Mat Kit (includes 66-80387A95
antistatic mat, 66-80334B36 ground
cord, and 42-80385A59 wrist band)
GSM / DCS / PCS Test SIM
Disassembly tool, plastic with flat and
pointed ends (manual opening tool)
Tweezers, plastic
Torque Driver Bit T-5 Plus, Apex 440-6IP
Torx Plus or equivalent
Digital Multimeter
December 6, 2005
Application
Used to charge battery and power phone
Provides protection from damage to
phone caused by electrostatic discharge
(ESD)
Used to enable manual test mode
Used during assembly/disassembly
Used during assembly/disassembly
Used with torque driver
Used to measure battery voltage
C113
.