Table of Contents
Advertisement
ENGLISH
Note: If you do not press a button within 5 seconds, the
equalizer programming feature will automatically return to the
previous setting.
Using Bluetooth® Wireless
Technology*
Turn the radio on (2).
u
Go to the Bluetooth settings on your Bluetooth enabled
u
device.
Find "P3BTR" under devices and select to pair your
u
(9) while the pairing takes place. Once the pairing is
successful the Bluetooth symbol will remain steady.
To listen to your Bluetooth enabled device through the
u
radio, press the Bluetooth button (7) or press the mode
button (3) until "bt" appears on the LCD display (9).
Begin playing music on your device.
u
Note: The radio does not have to be in the Bluetooth mode
when pairing, only when listening.
*The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Stanley FatMax is under license. Other trademarks
and trade namesare those of their respective owners.
Incoming Call
If your phone receives a call while it is connected to the radio
it will ring through the radio speakers.
Samsung** When the call is answered, the caller's voice will
be heard through the radio. To transfer the call to your phone,
deselect the headset option on your phone. The radio will
remain mute until the call is over. End the call normally with
your cell phone. The radio will resume previous function.
**Samsung® is a registered trademarks of Samsung Group.
iPhone®*** When the call is answered, the call should be
taken through your phone. If it is taken through the radio,
transfer the call to your phone. Select "audio source" on your
phone, then select "iPhone." The radio will remain mute until
the call is over. End the call normally with your cell phone. The
radio will resume previous function.
Important Radio Notes
Reception will vary depending on location and strength of
u
radio signal.
Certain generators may cause background noise.
u
AM reception will most likely be clearer when powered by
u
a battery pack.
To use the auxiliary port (13), plug the output jack from a
u
CD or iPod®***/MP3 player into the auxillary port. The
sound from the external source plays through the
speakers.
***iPod® and iPhone® are registered trademarks of Apple Inc.
6
(Original instructions)
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local Stanley FatMax repair agent.
Warning! Before proceeding, unplug the appliance.
Problem
Possible Solution
Cord not plugged in
Unit will not power on
Circuit fuse is blown
Circuit breaker is tripped
Cord or switch is
damaged
Battery is not charged
Battery is not fully
NBC appears on the
connected
LCD window
Battery does not have
enough power
Battery has been removed
Adapter unplugged
without battery in place
Power to outlet is off when
using adapter
Device roamed out of
Bluetooth®
range
disconnected
Possible Cause
Plug the radio into a
working outlet
Replace circuit fuse (if
the product repeatedly
causes the circuit fuse
to blow, discontinue
use immediately and
have it serviced at a
Stanley FatMax
service centre or
authorised servicer)
Reset circuit breaker (if
the product repeatedly
causes the circuit breaker
to trip, discontinue use
immediately and have it
serviced at a Stanley
FatMax service centre or
authorised servicer)
Have cord or switch
replaced at a Stanley Fat
Max service centre or
authorised servicer
Charge battery
Push battery fully into the
battery port and ensure it
is properly connected
Charge battery
Replace battery
Plug adapter into outlet or
perperly insert battery
Ensure wall outlet is
receiving power or
properly insert battery
Bring device into range of
radio
CDevice may need to be
paired to the radio again,
see "Using Bluetooth
Wireless Technology"
Advertisement
Table of Contents
