Resource Configuration; Peripheral Configuration - ASROCK GE PRO-HT User Manual

Resource Configuration:

PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
F1:Help
Esc:Previous Menu
PCI Latency Timer (PCI Clocks): The default is 32. We recommend you to
keep the default value unless your PCI expansion cards' specifications
require other settings.
Primary Graphics Adapter: This allows you to select [PCI], [Add-on AGP],
or [OnBoard VGA] as the primary graphics adapter.

Peripheral Configuration:

OnBoard FDC
OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port
OnBoard Midi Port
OnBoard Game Port
OnBoard IDE
OnBoard LAN
OnBoard AC' 97 Audio
OnBoard MC' 97 Modem
F1:Help
Esc:Previous Menu
OnBoard FDC: Use this to enable or disable floppy drive controller.
OnBoard Serial Port: Use this to set addresses for the onboard serial ports or
disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 /
COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
OnBoard Infrared Port: You may select [Auto] or [Disabled] for this onboard
infrared port feature.
This Manual: http://www.manuallib.com/file/2630978
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Resource Configuration
:Select Item
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Peripheral Configuration
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
Midi IRQ Select
:Select Item
<Enter> to select PCI
32
clocks. Leave on
PCI
default setting for the
best PCI performance.
+/-:Change Values
Enter:Select Sub-Menu
<Enter> to enable or
disable the floppy
Auto
drive controller.
Auto
Disabled
Auto
ECP+EPP
EPP 1.9
Auto
N / A
Disabled
5
200h
Both
Enabled
Auto
Auto
+/-:Change Values
Enter:Select
Sub-Menu
[ Setup Help ]
F9:Setup Defaults
F10:Save & Exit
[ Setup Help ]
F9:Setup Defaults
F10:Save & Exit
2 3