Tv Side Panel - Mitsubishi Electric LT-40133 Owner's Manual

10
1. Television Overview

TV Side Panel

The side panel contains TV control buttons and addi-
tional input jacks.
System Reset
Button (see more
information below)
Side Panel
Buttons.
(duplicates some
of the keys on
the TV remote
control)
Side Panel
Jacks.
System Reset Button
If the TV does not respond to the remote control, side
panel controls, or will not power on/off, press the
SYSTEM RESET button on the side panel with a pointed
object, such as the point of a pencil or end tip of a
paperclip.
The blue POWER LED will flash quickly for about one
minute. When the blue POWER LED stops flashing, you
may turn on the TV. Recent setting changes you made
before using SYSTEM RESET may be lost.
A/V Reset
If you wish to reset the A/V (Audio/Video) settings back
to the factory defaults:
• To reset all settings at once, press GUIDE and FORMAT
on the side panel at the same time.
• To reset the defaults for individual inputs, use the
Reset selection found in the AV menu.
See chapter 4,
"TV Operation
and Features"
See chapter 3,
"TV Connections"
Side Panel Input Jacks
model LT-40134 only
1. COMPONENT 3 Inputs
Y Pb Pr (480i/480p/720p/1080i)
COMPONENT 3 is a third set of component inputs. Use
these jacks to connect devices with component video
outputs, such as DVD players, external HDTV receivers,
or compatible video game systems. See Appendix A,
"Specifications," for signal compatibility.
2. INPUT 3
(Audio and Video)
The INPUT 3 jacks have multiple uses. The Y/VIDEO
jack can serve either as a yellow composite video jack or
as a green component video jack. The audio jacks can
be used with either the composite or component inputs
nearby on the side panel. On model LT-40134, the audio
jacks also work with a DVI source connected to HDMI 4.
3. HDMI™ 4 Input (LT-40134 model only)
HDMI 4 is an HDMI™ Input located on the TV's side
panel for convenience. See item 6, "HDMI™ Inputs" for
description and use. When you connect a DVI device
to HDMI 4, use the nearby INPUT 3 right and left audio
jacks to hear analog audio from the device.
4. USB Photo Port
The USB port is used for viewing JPEG images. See chapter
4, "TV Operation and Features" for more information.
1
Component 3
(All 5 jacks)
2
Input 3
(Bottom 3 jacks)
3
4
(Audio and Video)