Canadian Doc Notice; Precautions - Acer AL1917X User Manual

NOTE
A shielded-type signal cord is required in order to meet the FCC emission limits and also to prevent interference to
the radio and television reception. It is essential that only the supplied signal cord be used.

Canadian DOC Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numerique de la classe B repecte toutes les exigences du Reglement
sur le materiel brouilleur du Canada.
Preface
This manual is designed to assist users in setting up and using the LCD Monitor. Information in his document has
been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this document is subject to change without notice. This document contains proprietary information
protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior written permission of the manufacturer.
1. To clean LCD Monitor screen;Power off LCD Monitor and unplug the AC Cord.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain
3. Do not place the LCD Monitor near a window. Exposing the monitor to rain
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any
5. Store LCD Monitor in a room with a room temperature of-20°C ~ 60°C (or -4°F ~
6. If any of the following occurs, immediately unplug your monitor and call an authorized
Important Safety Instructions
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
water, moisture or sunlight can severely damage it. ter, moisture or sunlight can
severely damage it.
water, moisture or sunlight can severely damage it. ter, moisture or sunlight can
severely damage it.
nature should be performed by an authorized technician.
140°F).Storing the LCD Monitor outside this range could result in permanent damage.
technician.
* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
* LCD Monitor or the case is damaged.
3