Inlet Valve - LG WD(M)-8070F(H)(B) Service Manual

INLET VALVE

PWB ASSEMBLY (MAIN)
WD(M)-8070F(H)B, WD(M)-1070(5)F(H)B, WD(M)-1170(5)F(H)B, WD(M)-1270(5)F(H)B, WD(M)-1370(5)F(H)B
WD(M)-8074F(H)B, WD(M)-1074(6)F(H)B, WD(M)-1174(6)F(H)B, WD(M)-1274(6)F(H)B, WD(M)-1374(6)F(H)B
WD-8078FHB, WD-1078FHB, WM-1171(6)FHB, WM-1371(6)FHB, WD-1271FB
¤ Remeve the back cover.
WD-8070F(H), WD-1070(5)F(H)
LOWER COVER
3
2
1
Disconnect the wiring receptacle.
Unscrew 2 screws from the back.
When reconnecting the connector.
VALVE #1 (MAIN)
VALVE #2 (PRE)
VALVE #3 (HOT)
[WD(M)-8070F(H)(B)/WD(M)-1070(5)F(H)(B)/WD(M)-1170(5)F(H)B
WD(M)-1270(5)F(H)B/WD(M)-1370(5)F(H)B/WD(M)-8074F(H)B
WD(M)-1074(6)F(H)B/WD(M)-1174(6)F(H)B/WD(M)-1274(6)F(H)B
WD(M)-1374(6)F(H)B/WD-8078FHB/WD-1078FHB/WM-1171(6)FHB
WM-1371(6)FHB/WD-1271FB]
¤ŁUnscrew 2 screws.
¤Ø Pull the PWB assembly (Main) as shown.
Unscrew 2 screws.
Pull the PWB assembly (Main) as shown.
Open the lower cover plate by using coin and pull out the
lower cover in the arrow direction after a screw is
unscrewed.
32
Whited/Black-Black
Gray/ White - Black
Blue/Red - Black